E-Inception AM 9.7.1 GTF Generation 1

Vægt	23.7 kg
Ramme	Carbon SL HMF
Størrelser	29"/27.5" - 16", 18", 20", 22"
Color	Stealth Black

Priser

Vejl. Udsalgspris: 10 169.00 €

AM as in "All-Mountain"

Whether E-MTB racing or the pure desire for performance: Bosch's exclusive Performance Line CX Race Limited Edition drive unit provides the propulsion for our top-of-the-range E-Inception All-Mountain model. The drive unit uses Bosch's Race mode, specially developed for eMTB racing and only available for the Performance Line CX Race Limited Edition motor, which promises extremely powerful, direct support of 400 per cent of your own pedal power and therefore maximum performance on the steepest and most demanding uphill sections. The motor power is fed by a permanently installed, high-capacity 750 Wh battery for practically limitless touring fun and plenty of reach even on challenging terrain. In addition, and as befits a top-of-the-line model, the AM 9.7.1 GTF is equipped with the finest high-end components. In addition to Shimano's exclusive XTR high-end MTB drivetrain, this also includes the sophisticated 150 mm Fox Factory suspension, consisting of the 36 Float Factory fork and Float DPS Factory rear shock.

High performance all-mountain full-suspension e-bike w/ high-tech carbon frame and 29"/27.5" wheels
Exclusive Bosch Performance Line CX Race Limited Edition drive unit with special race mode for extreme support and superior performance even in the most challenging uphill situations
Classy 150mm chassis from Fox: 36 Float Factory e optimized/Float DPS Factory
Hama USB-C smartphone charging socket on the top tube
High-end components from Acros, Race Face, Shimano

Galleri

Billederne kan afvige. Udstyr kan ændres.

Chassis

Ramme

Carbon SL HMF

O.L.D.: 148 mm
Brake: postmount disc 7"
BB: Bosch
Cable routing: internal

Forgaffel

Fox 36 Float Factory E-Optimized

Travel: 150 mm
Air suspension
Tapered Steerer 1 1/8" - 1.5"
O.L.D.: 110 mm
Brake: postmount disc 7"

Headset

Acros Blocklock Taper 1 1/8"-1 1/2"

Upper bearing cup: ZS56/28.6
Lower bearing cup: ZS66/40

Fjeder dæmper

Fox Float DPS Factory

Travel: 150 mm
Air suspension
Length: 205 mm
Shock travel: 60 mm
Mounting width: Trunnion Mount/25.0x8 mm

Brake front

Shimano XTR

BR-M9120
Hydraulic disc brake
4 pistons

Brake rear

Shimano XTR

BR-M9120
Hydraulic disc brake
4 pistons

Brake disc

Shimano RT-MT905

Rotor size: 203 mm
6-bolt
Ice Technology FREEZA

Drivetrain

Kranksæt

Oxygen E-Scorpo

BB type: Bosch / ISIS
Chainguard

Motor sprocket

STEVENS E-MTB

36 T
Chainline: 52 mm

Bagskifter

Shimano XTR Shadow+

RD-M9100-SGS
12-speed
Total capacity: 41 T

Kæde: Shimano CN-M8100

Kassette

Shimano Deore XT

CS-M8100-12
12-speed
Combination: 10-12-14-16-18-21-24-28-33-39-45-51 T

Pedaler: MTB Alu Flatpedal Reflex

E-System

Motor

Bosch G4 Performance Line CX Race

Limited edition
The smart system
Continuous rated power: 250 W
Max. torque: 85 Nm
Breakaway at 25 km/h (15.5 mph)
Exclusive Race mode
No of notches: 4 drive modes with support levels 60-400 % plus walk assistance
Hill hold function
Mileage: See BOSCH Range Assistant

Batteri

Bosch PowerTube 750

The smart system
Capacity: 750 Wh/20.1 Ah
Voltage: 36 V
Technology: Li-Ion

Oplader: Bosch 4A charger

Hjulsæt

System wheel front

Race Face Next-R 36 Carbon

Axle: QR15x110 mm

System wheel rear

Race Face Next-R 36 Carbon

Axle: QR12x148 mm

Tire front

Schwalbe Magic Mary Evolution

Tire size: 65-622
Super Trail
Foldable
ADDIX Soft compound
SnakeSkin
Tubeless Easy

Tire rear

Schwalbe Magic Mary Evolution

Tire size: 65-584
Super Trail
Foldable
Addix Soft compound
SnakeSkin
Tubeless Easy

Cockpit

Styr

Race Face Next-R Carbon

Width: 800 mm
Rise: 35 mm
Clamp: 35 mm

Frempind

Race Face Turbine-R

Handlebar clamp: 35 mm
Angle: 0°

Sadel: Fizik Terra Alpaca

Sadelpind

Fox Transfer Factory

Travel: 125 mm | 150 mm | 175 mm
Remote
Length: 320 mm | 379 mm | 444 mm
Diameter: 30.9 mm
Insertion depth: 80 mm | 85 mm | 92 mm

Shift lever right

Shimano XTR

SL-M9100-R
12-speed
I-SPEC EV

Bremsehåndtag

Shimano BL-M9120

2 finger

Display

Bosch Kiox 300

The smart system

Data

Vægt: 23.7 kg

Till. totalvægt: 140 kg

Farve(r): Stealth Black

Størrelser: 29"/27.5" - 16", 18", 20", 22"

Teknologi

GTF geometry

A long reach and slack head angle ensure better downhill performance –just Gas To Flat.

Mere …

29/27.5" wheels

29" at the front, 27.5" at the rear – more trail fun thanks to wheels of different sizes.

Mere …

QR15 thru axle

The most functional method of anchoring the front wheel in the (suspension) fork.

Mere …

On/off switch with integrated USB-C charging socket

Smart technology for ease of use meets full biker support.

Mere …

Block Lock headset with impact protection

No bumps in tight bends: the Acros Block Lock headset gives E-MTB bikers maximum control.

Mere …

Dropper post

Optimum seat height for drive efficiency. Press the button. Saddle down for technical descents.

Mere …

Integrated kickstand mount

If you want a kickstand, you get one. If you don’t need it, you won’t even see the integrated stand mount.

Mere …

GTF geometry

The sporty GTF geometry of the STEVENS E-Inception series is fully designed for downhill-orientated performance. A long reach and a slack steering angle give the E-Fully a smoother ride, which has a positive effect on the downhill controllability of the E-MTB. A shorter head tube and steeper seat angle provide more control on steep climbs. Incidentally, GTF stands for Gas To Flat and means full throttle with full control down the mountain.

29/27.5" wheels

A 29" wheel at the front and a 27.5" wheel at the rear ensure even more trail fun and performance on the descent. While the larger front wheel provides more grip, better rollover behaviour and smoothness, the smaller rear wheel provides more space, more acceleration and, above all, more agility in tight corners. The so-called mullet bikes can fully utilise their advantages, especially downhill.

QR15 thru axle

The "15" stands for the axle diameter, the "QR" for "Quick Release" – and together for the most functional method of anchoring the front wheel in the (suspension) fork. The advantages are impressive: high rigidity, precise brake disc positioning and foolproof operation. STEVENS therefore equips all mountain bikes and E-MTBs as well as the highest quality trekking bikes, cross bikes and E-bikes with them. For (E-)MTBs in particular, the installation width has even been increased – from 100 to 110 mm, which is even stiffer.

On/off switch with integrated USB-C charging socket

On the E-Inception models with Shimano drive and the large Darfon battery, a USB-C charging socket on the top tube – ensures that the smartphone, action camera or lighting system are powered for as long as the trail adventure lasts. Riders can also switch the system on and off in a smart and user-friendly way on the top tube.

Block Lock headset with impact protection

Anyone travelling on alpine trails with their E-MTB demands maximum control. Thanks to its 150° pivot angle and high-quality ball bearing, the Acros Block Lock headset with integrated cable routing ensures that the top tube is optimally protected from impacts in tight bends or in the event of a fall. The fact that this results in fewer crashes in the first place is a further benefit of the impact protection.

Dropper post

Optimum seat height for drive efficiency. Press the button. Saddle down for technical descents. Button ... it could go on and on – and on some technical trails, the seatpost remote is used more often than the front derailleur shifter. Experts in riding fun and safety agree: rarely has an innovation brought such convincing advantages and so few disadvantages (weight, price) as seatposts with infinitely adjustable seat height.

Integrated kickstand mount

A practical stand on the rear triangle of STEVENS E-Inception bikes is not a must, but a welcome extra. That’s why our engineers have installed an inconspicuous kickstand mount. The FEQ models come with a kickstand as standard. It can be retrofitted to all other E-Inception models without any problems and without sacrificing heel clearance on complex trails.

Geometri

schematische Skizze eines Fahrrades mit eingezeichneten Geometrie-Messpunkten

Online størrelsesrådgivning erstatter ikke rådgivning fra en specialforhandler. Den tjener som en indledende orientering og kan afvige fra personlige præferencer. En prøvetur giver den bedste sammenligning.

Stelhøjde (")		16	18	20	22	Målemetode
Saddelrørslængde	A1	634	643	658	682	Nominel
Saddelrørslængde	A2	390	430	460	510	Krankmidte til overk. Saddelrør
Saddelrørslængde	A3	315	315	316	354	Krankmidte til overk. Overrør
Overrørslængde	B	558	574	597	623
Overrør vandret	C	585	605	630	655	til skæringspunkt saddelpind
Kronrørsvinkel (°)	D	65	65	65	65
Saddelrørsvinkel (°)	E	76,7	76,5	76,3	76,1
Hjulafstand	F	1221	1242	1268	1295
Kædestiverlængde	G	450	450	450	450
Kronrørslængde	H	105	115	125	145
Krankforsænkning	I	23,5	23,5	23,5	23,5	Afstand til navhøjde*
Krankhøjde	K	345	345	345	345	Afstand til jorden*
Gaffelfrembøjning	L	44	44	44	44
Slope	M	299	306	313	305	Overrør niveauforskel v/h
Radius hjul voran	N1	381	381	381	381	tyred
Radius hjul bag	N2	361,5	361,5	361,5	361,5	tyred
Overrørshøjde	O	755	755	755	792	Overkant overrør til jorden*
Gaffelhøjde	P	567	567	567	567	Inkl. bundkoppen*
Afstand forhjul-krank	Q	772	793	819	846
Reach	R	447	464	486	505	Vandret fra krank til kronrør
Stack	S	620	629	639	657	Lodret fra krank til kronrør
Stack/Reach (1:x)		1,39	1,36	1,31	1,3	Forhold fra Stack til Reach
Saddelpind Ø		30,9	30,9	30,9	30,9
Frempindslængde		40	40	50	50	Midte-midte
Frempindsvinkel (°)		0	0	0	0
Styrspænd		35	35	35	35
Spacerudstyr		9,5 + 35 + 210
Styrbredde		800	800	800	800
Pedalarmslængde		165	165	165	165
		16	18	20	22

* Med rytter og let fjederbelastet fjedergaffel (standard-køreposition)

* measured 100 mm ahead of bottom bracket

Bike-Category 6 E

E-enduro and E-all mountain bikes

This category describes STEVENS E-enduro and E-all mountain bikes. Full suspension STEVENS E-mountain bikes with medium suspension travel are typical for this category.

Instructions on intended use

The maximum permissible overall weight (comprising rider, luggage, possibly trailer load and electric bicycle) should not exceed 140 kg. Under certain circumstances the permissible maximum weight can be further limited by the component manufacturers’ recommendations for use.
On full suspension STEVENS E-mountain bikes made of aluminium the use of trailer is permitted. On full suspension STEVENS E-mountain bikes made of carbon, however, the use of trailers is not permitted.
On full suspension STEVENS E-mountain bikes child seats are not permitted.

STEVENS E-enduro and E-all mountain bikes are designed for off-road use (Alpcross etc.). STEVENS bikes of this category can be used on surfaces permitted for bikes of the categories 1, 3, 4 and 5. Furthermore, STEVENS bikes of this category are suitable for very rough and partly blocked terrain with steeper slopes and higher speeds as a result thereof. On official tracks regular jumps by experienced riders up to a height of 1.2 m are not a problem for these STEVENS bikes. The regular and durable use of these STEVENS bikes in bike parks, must however be excluded by STEVENS. In addition, these STEVENS bikes are not suitable for tricks, stair riding etc. as well as training and competitive use in the categories freeride, dirt, downhill.

Due to their design and fittings, STEVENS E-mountain bikes of the category 6 E are not always suitable for being used on public roads. If you want to use them on public roads, these bikes must be fitted with the prescribed equipment. Observe the traffic rules when riding on public roads. . For more information read the chapter “Legal Requirements for Riding on Public Roads” in your comprehensive STEVENS user manual on our website www.stevensbikes.de/manual.

Danger:

Due to the higher loads, STEVENS e-bikes of the category 6 E should be checked for possible damage after every ride. Two inspections per year at least carried out by your STEVENS dealer are obligatory.

	Stealth Black
16"	4045985048247
18"	4045985048254
20"	4045985048261
22"	4045985048278